Related products
-
12", DD Audio
DD Audio DD612-D2 12″ Subwoofer
The 600 Series is a great entry point for a higher performance system design that keeps the vehicle as close to stock as possible. The 600 Series will perform like a boss on as little as 300-600 Watts rms, meaning even multiple woofer systems can be driven with one moderate powered amplifier. This keeps electrical upgrades minimal with less added strain on the vehicle. It has a high energy, double stack motor paired with a laminated triple layer poly cotton spider suspension. The 600 Series works best with vented and multi-order?enclosures.
600 Series Features:
-
The 600 series woofers features:
- Double Stitched EROM Surrounds
- High-temp 2.5?, aluminum former voice coil
- 300W-600W RMS
- 1800W Peak
- Triple Layer Laminated Spiders
- Non-pressed paper cones
- Stamped steel basket with cooling vents (note : the 8″ has a cast aluminum basket)
- 10-AWG Push Terminals
- Back plate coil gap venting
- 3-Way cooling
- Extended pole piece
- 110oz double stack magnet
SPECS
MODEL 612 Driver Size – in 12 Power Band – Watts 300 – 600 Burst Power – Watts 1800 VCD – in 2.5 Impedance D2 / D4 Sd – in 10 Fs – Hz 37.68 Qms 6.305 Qes 0.692 Qts 0.624 Vas – cu ft 0.914 Xmech – mm 64 Xmax – mm 13 Cutout Diameter – in 11.125 Mounting Depth – in 5.938 Motor Diameter – in 6.375 Driver Displacement – cu ft 0.09 Shipping Weight – lbs 18 Sealed Enclosure – cu ft N/A Ported Enclosure – cu ft 1.75 – 2.75 SKU: n/a -
-
12", Rockford Fosgate
Rockford Fosgate P1S2-12 12? Punch P1 2-Ohm SVC Subwoofer
Rockford Fosgate P1 12? is the first in a family of famous ?Punch? subwoofers. The P1S2-12 features a 2-Ohm voice coil, 250 Watts RMS power handling, and can accommodate a grille insert using the included soft touch ABS trim ring.
- Linear spider with embedded 16 AWG tinsel leads
- High-temp voice coil with spun-laced Nomex? re-inforcement collar
- Kevlar fiber reinforced paper cone
- StampCast basket with integrated spider venting
- Soft touch ABS trim ring with optional grille
- Custom 10-AWG nickel plated push terminals
- Extended pole piece and bumped vented backplate
- Protective PVC textured magnet cover
SKU: n/a
