DB Drive S5-6C Component System 400 Watts
Out of stock
Specifications:
Max Power 400 watts
Nominal Power 90 watts
Paper composite cone with TSD coating
25mm dome tweeter with multi-mount
12db per octave passive X-over
Butyl rubber surround
Steel stamped basket
Aluminimum voice coil for higher power handling
FEA designed Ferrite oxide magnet structure on low frequency drivers
Mesh grills
Nominal Impedence: 4 Ohms
Speaker Sensitivity: 92dB
Frequency Response: 35Hz – 20kHz
$149
Out of stock
Related products
-
Component, DD Audio
DD Audio CC6.5 A 6.5″ High Quality Component Set
0 out of 5(0)Audibly Refined| 6.5″ High Quality Component Set
The C Class 2-Way Component System is the perfect balance of high-fidelity refinement and value.
Mid-Woofer
The 6.5-in mid-woofer features a coated paper cone that provides warm tonal characteristics with added environmental element resistance for the mobile environment. The surround is made of a lightweight rubber compound that adds durability without sacrificing any sound. For the frame, we used a sexy low resonance cast aluminum frame. For reduced inductance, extended high-frequency roll off , and increased efficiency the voice coils feature a double slit former and the motor utilizes a copper pole cap . The soft parts are driven with a high flux 17 Oz ferrite magnet motor.Tweeter
The 25-mm silk dome tweeter features a vented back for a wider/smoother frequency response.Crossover
The Crossover networks are built with premium components, including Mylar capacitors, segmented air-core inductors and poly fuses for tweeter protection. Three selectable tweeter levels are provided for fine high-frequency tuning.Driver Size – in
Woofer 6.5 / Tweeter 25mm
Power Band – Watts
60-180
Impedance
S4
Frequency Response – Hz
50-20k
Cutout Diameter – in
Woofer 5.73 / Tweeter 1.65
Mounting Depth – in
Woofer 2.67 / Tweeter 0.47
Shipping Weight – lbs
10Any DD Audio Product bearing the Marine Grade logo incorporates water resistant features enabling it to be used in applications where moderate exposure to moisture will not result in damage to the product.
Marine Grade products are not waterproof, and submersion or excessive moisture exposure may result in product failure. DD Audio Marine Grade products are not certified for saltwater environments.
Copper Capped Pole Piece
As current flows through the voice coil, it generates its own magnetic field which interacts, or modulates the motors permanent magnet field. A shorting ring cancels these magnetic field changes and lowers inductance, extending the frequency range and reducing harmonic distortion.Aluminum – Double Slit Voice Coil Former
The aluminum former material acts as a heat sink, lowering the voice coil temperature. The double slits in the former break up and reduce magnetic eddy currents generated by the moving coil. The coil design works in conjunction with the copper capped pole piece to further reduce heat, inductance, and harmonic distortions.SKU: n/a -
Component, DD Audio
DD Audio DC6X9 D CLASS 6X9 COMPONENT SET
0 out of 5(0)he D Class 6×9 Component set consists of high tech, high fidelity drivers designed for the listener wanting to go well beyond the standard factory upgrade.
Woofer:
Our focus on sound quality starts with precision motor assemblies. The machined magnet gaps driven with high energy strontium magnets provide strong output from a compact design. We incorporated distortion reducing copper shorting rings for flux modulation and inductance control. The aluminum mid woofer cones achieve wide bandwidth and efficient energy transfer to the air. The compressed rubber surrounds are durable and have been optimized for light weight to increase sensitivity.
Tweeter:
The tweeter side of the D Class component sets is our T2a 25mm ultra-light diaphragm tweeter. This new diaphragm is less than 0.003 of an inch thick; that’s almost nothing of a mm. This proprietary fabric is so thin it’s virtually see through, well, actually it is see through. The ultra-light dome is coupled to a low-distortion, neo motor with flush/surface mounting hardware and metal grill options.
Crossover:
The 2-way crossover features low distortion coils and metalized polypropylene caps that pass the source without degradation. The D Class components are purposefully built, enthusiast quality sets — everything you need for great sound and nothing you don’t.
SPECS
Driver Size – in Woofer 6×9 / Tweeter 25mm
Power Band – Watts 50-150
Impedance S4
Frequency Response – Hz 40-25k
dBSPL 90
Cutout Diameter – in 5.96 x 8.61
Mounting Depth – in 2.39
Shipping Weight – lbs 10Note: Any DD Audio Product bearing the Marine Grade logo incorporates water resistant features enabling it to be used in applications where moderate exposure to moisture will not result in damage to the product.
Marine Grade products are not waterproof, and submersion or excessive moisture exposure may result in product failure. DD Audio Marine Grade products are not certified for saltwater environments.
SKU: n/a -
Component, DB Drive
DB Drive ES9 6C : 6.5″ Component Speakers 300 Watts
0 out of 5(0)Description:
The Euphoria ES9C are DB Drive?s flagship loudspeakers.
The ES9 6C uses the finest driver elements designed by DB Drive to deliver an unprecedented purity of sound for the most realistic sound reproduction possible.
Pop , rock, jazz or classical music will sound as real as the day they were recorded in the studio.
Specially developed materials were used on all the ES9 6C drivers.
The midrange cones are hybrid cones that are lightweight and acoustically rigid enough to be dynamic with any level of output requirements.
The tweeters are made of a magnesium aluminum alloy with infused dampening properties , this allows for crystal clear dynamics with smooth frequency response.
True to life sound ? dynamic , realistic and incomparably natural sonic reproduction that is Euphoria.Mid – Hybrid Ultra-Rigid Glass Fiber with Butyl Rubber Surround and Die-cast Basket
1? (25mm ) Voice coil/ Ferrite Oxide Magnet Tweeter – 1? (25mm ) Black Aluminum-Magnesium
Polymer Dome with Neodymium Magnet
12 dB per Octave High Pass Crossover with Selectable Attenuation
Nominal Power : 100 Watts
Max Power : 300 Watts
Frequency Response : 30Hz – 22KHzSKU: n/a





