Kicker CXA1200.1 1,200w RMS Mono Amplifier:
Mono Monster
This mono CX-Series Amp is now one-ohm stable, giving you even more wiring options for your system! The Class-D CXA1200.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump. A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. From your dash, a simple turn of the optional CXARC Remote Bass Controller (sold separately) increases your output to fit your choice of music.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time!
Use the full-range outputs to expand your system with other bass amps, or add a full-range amp to complete your system.
This CXA1200.1 Amplifier delivers as much as 1,200 watts into one bass channel. See below for more details.
- Efficient Class-D amplifier
- Three-second turn-on/off delay to eliminate unwanted interference
- Variable 12dB crossovers provides control to dial in perfect sound
- KickEQ™ 6dB variable bass boost for those additional low frequencies
- 24dB subsonic filter for protection from potentially damaging frequencies
- FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
- Accepts up to 40-volt input signal
- Small footprint for easier installation
- Compatible with CXARC Remote Bass Control
- Vertical mounting hardware included for another unique look
If you have two mono amps or powered subwoofers, check out the DBRC Remote for controlling both from the same knob.
Specifications
| MODEL |
| CXA1200.1 |
| Power RMS (watts/ch) 4 Ohm |
| 600w x 1 |
| Power RMS (watts/ch) 2 Ohm |
| 1200w x 1 |
| Power RMS (watts/ch) 1 Ohm |
| 1200w x 1 +/-10% |
| CXRC Remote Bass Capable (sold sep.) |
| yes |
| Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x …L) |
| 12, 30.6 |
| Frequency Response (Hz): |
| 25-200Hz |
| Input Sensitivity: |
| 125mV–5V (Low Level) 1V–40V (High Level) |
| Signal-to-Noise Ratio: |
| 95dB |
| Active Crossover: |
| Variable Lo-pass 50Hz–200Hz, 12dB/octave |
| Subsonic Filter: |
| 25Hz @24dB/octave |
| KickEQ™ Boost |
| Variable 0-6dB @40Hz |
Related products
-
Outdoor Speakers, KICKER
KICKER KB6000W FULL-RANGE Outdoor Speakers (White)
That legendary KICKER sound is now made to rock from a backyard deck, under the eaves, or near the pool. And it still provides great sound on a boat, off-road vehicle or RV.
Full Range
The KB6000 is now a full-range, high-efficiency speaker system truly suitable for indoor and outdoor use, providing an 8-Ohm load and ready to be driven by home stereo receivers. That legendary KICKER sound is now made to rock from a backyard deck, under the eaves, or near the pool, and it still provides great sound on a boat, off-road vehicle or RV.
SKU: n/a -
speakers, KICKER
KICKER KM 6.5″ 195W Pair 4 Ohm Coaxial LED Marine Speakers
Loud and clear, the KM Coaxial Marine Speakers are built to pump out the tunes – and the fun – for years to come! Whether you mount your speakers in the hull or in KICKER® tower enclosures, you also get a pair of stout marine-grade grills!
LIGHT IT UP
Our speakers are made to thrive in the water. UV treatments on injection-molded cones, Santoprene® surrounds, baskets and grilles all help maintain top-shelf performance. KM speakers will endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel.
SKU: n/a -
enclosures, KICKER
KICKER KMTES 6½” Empty Enclosure Pair
Mounting powerful 6½-inch KICKER speakers for external listening in marine and powersport applications just got easier with KICKER’s durable and weather-proof KM-Series Tower-Speaker Empty Enclosures.
With its bold cosmetics, the black-textured KM enclosures with contrasting accent details complement KICKER’s 6.5-inch coaxial marine speakers.
SKU: n/a
