Rockford Fosgate P3S-1X12 Single P3 12″ Shallow Loaded Enclosure
The Rockford Fosgate P3S-1X12 is a single 12? Punch Shallow subwoofer rated at 400 Watts RMS loaded in a sealed enclosure. This subwoofer enclosure is internally wired to a 1-Ohm load and features 5/8? MDF and 10 AWG quick-release input terminals.
- Sealed truck box style enclosure
- Constructed with 5/8″ MDF
- 10 AWG input terminals
- 1-Ohm wired impedance
- Computer optimized design
- Covered with high density carpet
- Wired exclusively with Rockford Fosgate speaker cable
- Included trim ring ready to accept optional stamped mesh grille insert
| Nominal Impedance (ea): | 1-Ohm Internally wired to create a 1-Ohm amplifier load |
| Power Handling: | 400 Watts RMS 800 Watts MAX |
| System Configuration: | Sealed |
| Enclosure Material: | 5/8″ MDF (Medium Density Fiberboard) |
| Speaker Connector: | Up to 10 AWG compression terminals |
| Shipping Weight: | 27 Lbs. (12.24 kg) |
| Dimensions Box (H x W x D) Wedge (H x W x D1 x D2): |
13.5 x 27.4 x D1 5.3 – D2 3.3 (in) 34.29 x 69.59 x D1 13.46 – D2 8.38 (cm) |
$350
Related products
-
12", Rockford Fosgate
Rockford Fosgate P1S2-12 12? Punch P1 2-Ohm SVC Subwoofer
Rockford Fosgate P1 12? is the first in a family of famous ?Punch? subwoofers. The P1S2-12 features a 2-Ohm voice coil, 250 Watts RMS power handling, and can accommodate a grille insert using the included soft touch ABS trim ring.
- Linear spider with embedded 16 AWG tinsel leads
- High-temp voice coil with spun-laced Nomex? re-inforcement collar
- Kevlar fiber reinforced paper cone
- StampCast basket with integrated spider venting
- Soft touch ABS trim ring with optional grille
- Custom 10-AWG nickel plated push terminals
- Extended pole piece and bumped vented backplate
- Protective PVC textured magnet cover
SKU: n/a -
Loaded Enclosures, Sony
Sony BOX-NW1200 NW SERIES 12″ BOXED SUB
Sony designed the BOX-NW1200 sub enclosure to deliver space-saving bass in your compact car or truck. The enclosure houses an explosive 12″ sub with a unique five-sided design that helps the cone stay stiff while reducing standing waves that can diminish your bass output. The sub’s sturdy internal construction gives you strong performance over the long haul.
This sealed enclosure produces tight, accurate bass, and its medium-density fiberboard construction means this box can stand strong when the bass gets heavy. Industrial-grade black carpet protects your trunk from nicks and scratches. This loaded enclosure handles serious power ? 300 watts RMS ? so you can throw down with confidence. The gold-plated binding post terminals accept just about any speaker connector on the planet.
Specs:
- Power Handling:
- 300W RMS
- 1800W Max
- Medium-density fiberboard construction covered with black carpet
- 4-ohm total impedance
- Frequency response – 42-1,000 Hz
- Sensitivity – 87 dB
- 490mm W x 380mm H x 250mm D bottom x 210mm D top
SKU: n/a -
10", Rockford Fosgate
Rockford Fosgate P3D4-10″ Subwoofer
Product Highlights:
- 10″ subwoofer with dual 4-ohm voice coils
- anodized aluminum cone with Santoprene surround
- hybrid StampCast basket provides strength while minimizing weight and resonance
- Vertical Attach Surround Technique (VAST?) increases cone area
- power range: 250-500 watts RMS (1000 watts peak power)
- frequency response: 28-250 Hz
- sensitivity: 82 dB
- top-mount depth: 6-3/16″
- sealed box volume: 0.5-0.75 cubic feet
- ported box volume: 1.4 cubic feet
SKU: n/a -
12", Rockford Fosgate
Rockford Fosgate P2D4-12″ Subwoofer
his P2 sub features an extended pole piece and bumped backplate that leaves more room for heavy excursion, so it’ll hit deeper lows without “bottoming out.” Special venting keeps the copper-clad aluminum voice coils cool through heavy use for consistent bass performance over time.
The dual 4-ohm voice coils allow you to wire the sub for 2-ohm impedance to work with a mono sub amp, or for 8-ohm impedance if you’re using multiple subs. The P2D4-12 sub works equally well in a sealed or ported enclosure, so you can choose the kind of bass you want for your system.
To drive this single subwoofer, we recommend a mono amplifier rated between 300 and 600 watts RMS at 2 ohms.
Product Highlights:
- 12″ subwoofer with dual 4-ohm voice coils
- Kevlar? reinforced paper cone
- Santoprene surround
- hybrid StampCast basket provides strength while minimizing weight and resonance
- power range: 150-400 watts RMS (800 watts peak power)
- frequency response: 27-250 Hz
- sensitivity: 86 dB
- top-mount depth: 6-3/8″
- sealed box volume: 0.70-1.80 cubic feet
- ported box volume: 1.79 cubic feet
SKU: n/a
