, ,

Rockford Fosgate P1S2 15″ Subwoofer


Rockford Fosgate showcases their fanatical commitment to sonic excellence in the Punch Series of speakers, amps, and subs. If you like to listen to potent, powerful music ? and feel it too ? Punch components will give you impressive sound that’ll stand out in a crowd.

Engineers at Rockford Fosgate designed the P1S4-15 15″ subwoofer to dish out the kind of powerful low end you crave in your ride. Its responsive paper cone is reinforced with the same Kevlar fibers used in bulletproof vests so you get the best of both worlds warm bass that’s exceptionally hard-hitting. Rockford Fosgate uses a new technique to attach the oversized rubber surround to the cone that increases available cone area up to 25%, so this sub can push more air for even bigger bass.

The P1S2-15 sub features an extended pole piece and bumped backplate that leaves more room for heavy excursion, so it’ll hit deeper lows without “bottoming out.” This sub works equally well in a sealed or ported enclosure, so you can choose the kind of bass you want for your system.?The sub’s 2-ohm impedance will draw maximum wattage from your mono sub amp.

To drive this single subwoofer, we recommend a mono amplifier rated between 200 and 375 watts RMS at 2 ohms

Product Highlights:

  • 15″ 4-ohm subwoofer
  • Kevlar? reinforced paper cone
  • nitrile butadiene rubber (NBR) surround
  • hybrid StampCast basket provides strength while minimizing weight and resonance
  • Vertical Attach Surround Technique (VAST?) increases cone area
  • power range: 50-250 watts RMS (500 watts peak power)
  • frequency response: 18-250 Hz
  • sensitivity: 87 dB
  • top-mount depth: 6-5/16″
  • sealed box volume: 1.3-3.5 cubic feet
  • ported box volume: 2.66 cubic feet

$249

Punch 15″ P1 2-Ohm SVC Subwoofer P1S2-15

Rockford Fosgate P1 15” is the first in a family of famous “Punch” subwoofers. The P1S2-15 features a 2-Ohm voice coil, 250 Watts RMS power handling, and can accommodate a grille insert using the included soft touch ABS trim ring.

Rockford Fosgate P1 15″ are the first in a family of world famous subwoofers called “The Punch”. During their inception in the 1980’s, they quickly became “The Woofer of Choice” for fanatic car audio systems, with a continued tradition today. Kevlar fiber reinforced paper cones deliver bass impact you can feel, and our VAST technology increases surface cone area up to 25%. Best in standard sealed and vented enclosures. Includes soft touch ABS trim ring.

FEATURES AT A GLANCE

  • Linear spider with embedded 16 AWG tinsel leads
  • Kevlar fiber reinforced paper cone
  • StampCast basket with integrated spider venting
  • Rubberized ABS trim ring with optional grille
  • High-temp voice coil with spun-laced Nomex® re-inforcement collar
  • Custom 10-AWG nickel plated push terminals
  • Extended pole piece and bumped vented backplate
  • Protective PVC textured magnet cover
Size
15″
Subwoofer Type
Standard
CEA-2031 Compliant
CEA-2031 Guidelines
Power Handling (Watts RMS)
250 Watts RMS
500 Watts Max
Nominal Impedance: 2-Ohm
Speaker Connector: Dual 10 AWG compression
Voice Coil Type: Single Voice Coil
Magnet Weight (oz) 60 oz. (1.70 kg.)
Voice Coil Diameter 2.0″ (51.6 mm)
Qts 0.55
Qes 0.80
Fs (Hz) 23
Qms 3.46
Vas (Liters) 191.5
Le (mH) 1.12
Re (Ohms) 1.8
SPL (dB @ 1w/1m) 87
SPL (dB @ 2.8v/1m) 90
Xmax (mm) 9.0
Sd (cm2) 876
Mounting Depth 6.98 in. (177.2 mm)
Cutout Diameter 13.85 in. (351.8 mm)
Woofer Displacement 0.148 cu. ft. (4.2 Liters)
Sealed Box Volume (Vb) 1.58 cu. ft. (44.7 Liters)
Vented Box Volume (Vb) 2.66 cu. ft. (75.3 Liters)
SKU: P1S2-15 Categories: , ,

SHOPPING CART

close