DB Drive K1-12S4 12″ Subwoofer 600W
Out of stock
Specifications:
Max Power 600 watts @4ohm
RMS Power 250 watts
2″4 layer voice coil
Aluminum Former
Vac PP Cone with Polyether foam surround
Poly-Cotton Spider
Vac PP Dome
PVC Trim Ring/Gasket
Spring Terminals
47.5 oz Ferrite magnet
Stamped Steel Frame
Black Electro-plated Top and Bottom Plates
$109 $129
Out of stock
Related products
-
12", DD Audio
DD Audio DD512-D2 12″ Subwoofer
The 500 series is one of the best performing subs you can find in its power class. With a highly efficient design, the 500 series can easily be driven to high output levels on as little as 150-400 Watts. The 500s are very versatile subs with their?laminated double layer poly cotton spider allows them to work well in sealed enclosures, and its double stack magnet provides the extra energy needed for vented enclosures applications.
500 Series Features:
- Double Stitched EROM Surrounds
- High-temp 2.0?, aluminum former voice coil
- 150w-400w RMS, 1200w Peak
- Laminated Spiders
- Non-pressed paper cones
- Cooling vent equipped baskets
- Back plate coil gap venting
- Extended pole piece
SPECS
MODEL 512C Driver Size – in 12 Power Band – Watts 150 – 400 Burst Power – Watts 1200 VCD – in 2 Impedance D2 / D4 Sd – in 10 Fs – Hz 36.34 Qms 6.582 Qes 0.840 Qts 0.745 Vas – cu ft 1.194 Xmech – mm 64 Xmax – mm 11 Cutout Diameter – in 11.125 Mounting Depth – in 5.688 Motor Diameter – in 6 Driver Displacement – cu ft 0.09 Shipping Weight – lbs 15 Sealed Enclosure – cu ft 0.5 – 1.0 Ported Enclosure – cu ft 1.75 – 2.75 SKU: n/a -
12", Rockford Fosgate
Rockford Fosgate P2D4-12″ Subwoofer
his P2 sub features an extended pole piece and bumped backplate that leaves more room for heavy excursion, so it’ll hit deeper lows without “bottoming out.” Special venting keeps the copper-clad aluminum voice coils cool through heavy use for consistent bass performance over time.
The dual 4-ohm voice coils allow you to wire the sub for 2-ohm impedance to work with a mono sub amp, or for 8-ohm impedance if you’re using multiple subs. The P2D4-12 sub works equally well in a sealed or ported enclosure, so you can choose the kind of bass you want for your system.
To drive this single subwoofer, we recommend a mono amplifier rated between 300 and 600 watts RMS at 2 ohms.
Product Highlights:
- 12″ subwoofer with dual 4-ohm voice coils
- Kevlar? reinforced paper cone
- Santoprene surround
- hybrid StampCast basket provides strength while minimizing weight and resonance
- power range: 150-400 watts RMS (800 watts peak power)
- frequency response: 27-250 Hz
- sensitivity: 86 dB
- top-mount depth: 6-3/8″
- sealed box volume: 0.70-1.80 cubic feet
- ported box volume: 1.79 cubic feet
SKU: n/a
