Kenwood KFC-PS3017W 12" subwoofer, 2000W peak Subtotal: $149
-13%
12", DD Audio
DD Audio DD512-D2 12″ Subwoofer
Availability:
Out of stock
The 500 series is one of the best performing subs you can find in its power class. With a highly efficient design, the 500 series can easily be driven to high output levels on as little as 150-400 Watts. The 500s are very versatile subs with their?laminated double layer poly cotton spider allows them to work well in sealed enclosures, and its double stack magnet provides the extra energy needed for vented enclosures applications.
500 Series Features:
- Double Stitched EROM Surrounds
- High-temp 2.0?, aluminum former voice coil
- 150w-400w RMS, 1200w Peak
- Laminated Spiders
- Non-pressed paper cones
- Cooling vent equipped baskets
- Back plate coil gap venting
- Extended pole piece
SPECS
| MODEL | 512C | |||
| Driver Size – in | 12 | |||
| Power Band – Watts | 150 – 400 | |||
| Burst Power – Watts | 1200 | |||
| VCD – in | 2 | |||
| Impedance | D2 / D4 | |||
| Sd – in | 10 | |||
| Fs – Hz | 36.34 | |||
| Qms | 6.582 | |||
| Qes | 0.840 | |||
| Qts | 0.745 | |||
| Vas – cu ft | 1.194 | |||
| Xmech – mm | 64 | |||
| Xmax – mm | 11 | |||
| Cutout Diameter – in | 11.125 | |||
| Mounting Depth – in | 5.688 | |||
| Motor Diameter – in | 6 | |||
| Driver Displacement – cu ft | 0.09 | |||
| Shipping Weight – lbs | 15 | |||
| Sealed Enclosure – cu ft | 0.5 – 1.0 | |||
| Ported Enclosure – cu ft | 1.75 – 2.75 |
$259 $299
Out of stock
Related products
-
Component, DD Audio
DD Audio CC6.5 A 6.5″ High Quality Component Set
Audibly Refined| 6.5″ High Quality Component Set
The C Class 2-Way Component System is the perfect balance of high-fidelity refinement and value.
Mid-Woofer
The 6.5-in mid-woofer features a coated paper cone that provides warm tonal characteristics with added environmental element resistance for the mobile environment. The surround is made of a lightweight rubber compound that adds durability without sacrificing any sound. For the frame, we used a sexy low resonance cast aluminum frame. For reduced inductance, extended high-frequency roll off , and increased efficiency the voice coils feature a double slit former and the motor utilizes a copper pole cap . The soft parts are driven with a high flux 17 Oz ferrite magnet motor.Tweeter
The 25-mm silk dome tweeter features a vented back for a wider/smoother frequency response.Crossover
The Crossover networks are built with premium components, including Mylar capacitors, segmented air-core inductors and poly fuses for tweeter protection. Three selectable tweeter levels are provided for fine high-frequency tuning.Driver Size – in
Woofer 6.5 / Tweeter 25mm
Power Band – Watts
60-180
Impedance
S4
Frequency Response – Hz
50-20k
Cutout Diameter – in
Woofer 5.73 / Tweeter 1.65
Mounting Depth – in
Woofer 2.67 / Tweeter 0.47
Shipping Weight – lbs
10Any DD Audio Product bearing the Marine Grade logo incorporates water resistant features enabling it to be used in applications where moderate exposure to moisture will not result in damage to the product.
Marine Grade products are not waterproof, and submersion or excessive moisture exposure may result in product failure. DD Audio Marine Grade products are not certified for saltwater environments.
Copper Capped Pole Piece
As current flows through the voice coil, it generates its own magnetic field which interacts, or modulates the motors permanent magnet field. A shorting ring cancels these magnetic field changes and lowers inductance, extending the frequency range and reducing harmonic distortion.Aluminum – Double Slit Voice Coil Former
The aluminum former material acts as a heat sink, lowering the voice coil temperature. The double slits in the former break up and reduce magnetic eddy currents generated by the moving coil. The coil design works in conjunction with the copper capped pole piece to further reduce heat, inductance, and harmonic distortions.SKU: n/a -
12", Fusion
Fusion Performance PF-SW120D2 12″ Subwoofer
Specifications
Mounting Dimensions
Mounting Depth 158mm (6-1/4″) Mounting Diameter 279mm (11″) Product Specifications
Basket Pressed Steel Cone Material Pressed Paper Frequency Response 30Hz – 1.2kHz Peak Power (Watts) 1600 Rated Power (Watts) 400 Sensitivity (dB) 89 Surround Material Butyl Rubber Thiele Small Parameters
Compliance (Cms) (?M/N) 112.00u M/N Cone Area (Sd) (cm?) 530.93 Cone Area (Sd) (In?) 82.29 D.C. Coil Resistance (Re) (?) 4.47 Ohm Electrical Q (Qes) 0.84 Force Factor (Bl) (TM) 14.04 Free Air Resonance (Fs) 38.30 Linear Excurson (Xmax) (In) 0.24 Linear Excurson (Xmax) (mm) 6.00 Mechanical Excursion (In) 0.35 Mechanical Excursion (mm) 9.00 Mechanical Q (Qms) 2.93 Total Loudspeaker Q (Qts) 0.65 VAS (CuFt) 1.58 VAS (L) 44.69 Voice Coil Impedance 2 x 2 Ohm SKU: n/a -
12", Pioneer
Pioneer TS-W311D4 12″ Dual Voice Coil Subwoofer (1400W)
More bass. More power. Greater flexibility.
Get powerful, punchy bass in your car ? from the pedigree of world record-breaking subs.
The TS-W310D4 features a combined IMPP cone, which makes the body ultra-rigid yet lightweight, giving you low distortion and powerful bass at high sound press levels.
MPP Composite Seamless Cone
An extremely durable, yet lightweight cone is vital to prevent cone failure at high sound pressure levels. Pioneer?s New IMPP Composite Seamless Cones meet this need perfectly while delivering accurate yet powerful bass.
Dual-Layer Elastic Polymer Surround
Another world?s first from Pioneer. Dramatically improves durability and lightness for superior response, especially for louder volume.Large Surface Area
A speaker cone is essential for air to vibrate and carry sound to listeners? ears. Our Champion Series subwoofer cones have 14% more surface area than conventional subwoofer cones, for louder, better bass reproduction.Single/Dual Voice Coil Design
Pioneer offers single voice coil and dual voice coil designs. The Dual 4 ? subwoofer has the flexibility to be wired at 2 or 8 ?, to get the most from the amplifier. To simplify installation even further, all speaker terminals have been placed on one side of the subwoofer rather than on opposite sides.Air Vent
The movement of air within the subwoofer is smoothly channeled for optimal ventilation to ensure a quick response and clear reproduction of bass.Other Features
? Extra-tough suspension for high durability to withstand high input power.
? 4-Layer Copper voice coil with aluminium former for improved heat dissipation.
? Subwoofer design allows for flexible in-car installation in a box or in a free-air type application.Features
-
Maximum input power1.400?W
-
Nominal input power400?W
-
Impedance2? / 8?
-
Frequency response20 ? 250?Hz
-
Sensitivity (1W/1m)95?dB
-
Woofer size30,0?cm
-
Woofer materialIMPP Composite Seamless Cone
-
Voice Coil typeDual
-
Dual 4? voice coils: 2 or 8?
-
Pole Yoke TypeExtended and Vented pole yoke
-
TerminalsPush-type
-
Weight6.2 kg
-
SurroundDual Layer, Fiber Reinforced Elastic Polymer Surround
Thiele/Small Parameters
-
Qts0,77
-
Fs [Hz]37
-
Vas [ft3]1,21
-
Xmax [mm]10,8
-
Xmax [in]0,42
SKU: n/a -
-
Component, DD Audio
DD Audio EC6.5 6.5″ Component Set
The E Class 2-Way Component System is perfect for the listener who wants to instantly take their system from factory to fantabulous. This set offers high-end features and an outstanding sound that rivals much more expensive component sets.
Woofer:
The 6.5-inch Woofer features an injection molded poly cone, rubber surround , and rigid steel frame. For reduced inductance, extended high-frequency roll off , and increased efficiency the voice coils features a double slit former and the motor utilizes a copper pole cap . The soft parts are driven with a high flux 11 Oz ferrite magnet motor.Tweeter:
The 20-mm silk dome tweeter comes with flush-mount and surface-mount solutions.Crossover:
The crossover networks are built with premium components including Mylar capacitors, segmented air-core inductors and poly fuses for tweeter protection. Two selectable tweeter levels are provided for fine high-frequency tuning.Driver Size – in
Woofer 6.5 / Tweeter 20mm
Power Band – Watts
25-100
Coil Configuration
S4
Frequency Response – Hz
50-20k
Cutout Diameter – in
Woofer 5.60 / Tweeter 1.59
Mounting Depth – in
Woofer 2.45 / Tweeter 0.53
Shipping Weight – lbs
10LbsAny DD Audio Product bearing the Marine Grade logo incorporates water resistant features enabling it to be used in applications where moderate exposure to moisture will not result in damage to the product.
Marine Grade products are not waterproof, and submersion or excessive moisture exposure may result in product failure. DD Audio Marine Grade products are not certified for saltwater environments.
Copper Capped Pole Piece
As current flows through the voice coil, it generates its own magnetic field which interacts, or modulates the motors permanent magnet field. A shorting ring cancels these magnetic field changes and lowers inductance, extending the frequency range and reducing harmonic distortion.Aluminum – Double Slit Voice Coil Former
The aluminum former material acts as a heat sink, lowering the voice coil temperature. The double slits in the former break up and reduce magnetic eddy currents generated by the moving coil. The coil design works in conjunction with the copper capped pole piece to further reduce heat, inductance, and harmonic distortions.SKU: n/a
