6" x 9", Rockford Fosgate
Rockford Fosgate R169X3 6 x 9″ 3-Way Full-Range Speaker.
Availability:
Available on back-order
The R169X3 is a 6?x9? 3-way full-range speaker rated at 65 watts RMS for a new generation of factory replacement speakers. Kit includes integrated high-pass crossovers and mounting hardware.
- Vacuum Polypropylene cone
- Rubber surround
- Stamped steel basket
- Silk dome pole mounted Piezo tweeter and midrange
- Integrated tweeter crossover
- Grilles and mounting hardware included
$129
Available on back-order
Related products
-
Loaded Enclosures, Rockford Fosgate
Rockford Fosgate P3S-1X12 Single P3 12″ Shallow Loaded Enclosure
0 out of 5(0)The Rockford Fosgate P3S-1X12 is a single 12? Punch Shallow subwoofer rated at 400 Watts RMS loaded in a sealed enclosure. This subwoofer enclosure is internally wired to a 1-Ohm load and features 5/8? MDF and 10 AWG quick-release input terminals.
- Sealed truck box style enclosure
- Constructed with 5/8″ MDF
- 10 AWG input terminals
- 1-Ohm wired impedance
- Computer optimized design
- Covered with high density carpet
- Wired exclusively with Rockford Fosgate speaker cable
- Included trim ring ready to accept optional stamped mesh grille insert
Nominal Impedance (ea): 1-Ohm
Internally wired to create a 1-Ohm amplifier loadPower Handling: 400 Watts RMS
800 Watts MAXSystem Configuration: Sealed Enclosure Material: 5/8″ MDF (Medium Density Fiberboard) Speaker Connector: Up to 10 AWG compression terminals Shipping Weight: 27 Lbs. (12.24 kg) Dimensions
Box (H x W x D)
Wedge (H x W x D1 x D2):13.5 x 27.4 x D1 5.3 – D2 3.3 (in)
34.29 x 69.59 x D1 13.46 – D2 8.38 (cm)SKU: n/a$350 -
Amp Wiring Kits, Rockford Fosgate
Rockford Fosgate RFK8I 8 AWG Power & Signal Installation Kit
0 out of 5(0)- FULL spec cable ? meets or exceeds AWG (American Wire Gauge) requirements
- 100% Pure Crystal-Oxygen Free Copper (PC-OFC)
- Includes appropriate wire termination hardware
- 8AWG (8.36mm?) 735 strands
SKU: n/a$129 -
Monoblock, Rockford Fosgate
Rockford Fosgate R1200-1D 1,200 Watt Class-D Mono Amplifier
0 out of 5(0)The PRIME R1200-1D is an ultra-efficient mono amplifier that can produce 1,200 Watts into a 1-Ohm load without taxing the electrical system. The frequency response of the R1200-1D is optimized exclusively for use with subwoofers.
- 12dB/octave Butterworth crossover
- Infrasonic filter
- Remote PLC (Punch Level Control)
- RCA pass-thru outputs
- Real time output and power supply thermal sensing
- Cast aluminum heatsink
- Top mounted controls
- 4 Gauge power/ground connectors
- MOSFET power supply
- Short circuit protection
Number of Channels: 4 Rated Power
(RMS Continuous Power):400 Watts x 1 @ 4-Ohm
800 Watts x 1 @ 2-Ohm
1200 Watts x 1 @ 1-OhmTotal Power
(Sum of Rated Power):1200 Watts RMS Dynamic Power
(PVC/PowerCube?):499 Watts x 1 @ 4-Ohms 0? Res
898 Watts x 1 @ 2-Ohms 0? Res
1,400 Watts x 1 @ 1-Ohm 0? ResBridgeable: No Frequency Response: 20Hz to 250Hz /-1dB Efficiency (average): 85% @ 4-Ohm
85% @ 2-Ohm
80% @ 1-OhmTotal Harmonic Distortion(THD Noise): 4-Ohm: <1.0%
2-Ohm: <1.0%
1-Ohm: <1.0%Crossover Controls: Low-Pass: Variable 50Hz – 500Hz @ 12dB/Octave
Infrasonic:Tone Controls: 0dB to 18dB @ 45Hz Input Sensitivity: 150 mV to 4 V Signal Input: Low Level: 1 RCA Pair Signal Output: Low Level: 1 RCA Pair Power Input Connector: Block Power Wire Gauge: 4 AWG Speaker Output Connector: Block Speaker Wire Gauge: 12 AWG Heat Sink Type: Cast aluminum Cooling: Convection Remote Controls: Variable 0dB to 12dB @ 45Hz Visual Indicators: Power
ProtectCircuit Topology Class: Class-D Operating Voltage: 9 – 16 VDC Recommended Fuse
(not included):150 A Max. Current Draw (13.8V Sinewave): 110 A Average Current Draw (13.8V Music): 55 A Suggested Alternator: 100 A Shipping Weight: 7.825 Lbs. (7.82 Kg.) Dimensions (H x W x D): 1.97″ x 6.77″ x 11.06″
(5cm x 17.20cm x 28.10cm)SKU: n/a$699