JVC CW-DR120 12" Single Voice Coil 1200 Watt Peak Power. Subtotal: $130
12", Rockford Fosgate
Rockford Fosgate P2D4-12″ Subwoofer
Availability:
Out of stock
his P2 sub features an extended pole piece and bumped backplate that leaves more room for heavy excursion, so it’ll hit deeper lows without “bottoming out.” Special venting keeps the copper-clad aluminum voice coils cool through heavy use for consistent bass performance over time.
The dual 4-ohm voice coils allow you to wire the sub for 2-ohm impedance to work with a mono sub amp, or for 8-ohm impedance if you’re using multiple subs. The P2D4-12 sub works equally well in a sealed or ported enclosure, so you can choose the kind of bass you want for your system.
To drive this single subwoofer, we recommend a mono amplifier rated between 300 and 600 watts RMS at 2 ohms.
Product Highlights:
- 12″ subwoofer with dual 4-ohm voice coils
- Kevlar? reinforced paper cone
- Santoprene surround
- hybrid StampCast basket provides strength while minimizing weight and resonance
- power range: 150-400 watts RMS (800 watts peak power)
- frequency response: 27-250 Hz
- sensitivity: 86 dB
- top-mount depth: 6-3/8″
- sealed box volume: 0.70-1.80 cubic feet
- ported box volume: 1.79 cubic feet
$299
Out of stock
Related products
-
12", Fusion
Fusion Performance PF-SW120D2 12″ Subwoofer
Specifications
Mounting Dimensions
Mounting Depth 158mm (6-1/4″) Mounting Diameter 279mm (11″) Product Specifications
Basket Pressed Steel Cone Material Pressed Paper Frequency Response 30Hz – 1.2kHz Peak Power (Watts) 1600 Rated Power (Watts) 400 Sensitivity (dB) 89 Surround Material Butyl Rubber Thiele Small Parameters
Compliance (Cms) (?M/N) 112.00u M/N Cone Area (Sd) (cm?) 530.93 Cone Area (Sd) (In?) 82.29 D.C. Coil Resistance (Re) (?) 4.47 Ohm Electrical Q (Qes) 0.84 Force Factor (Bl) (TM) 14.04 Free Air Resonance (Fs) 38.30 Linear Excurson (Xmax) (In) 0.24 Linear Excurson (Xmax) (mm) 6.00 Mechanical Excursion (In) 0.35 Mechanical Excursion (mm) 9.00 Mechanical Q (Qms) 2.93 Total Loudspeaker Q (Qts) 0.65 VAS (CuFt) 1.58 VAS (L) 44.69 Voice Coil Impedance 2 x 2 Ohm SKU: n/a -
15", Rockford Fosgate
Rockford Fosgate P1S4 15″ Subwoofer
Rockford Fosgate showcases their fanatical commitment to sonic excellence in the Punch Series of speakers, amps, and subs. If you like to listen to potent, powerful music ? and feel it too ? Punch components will give you impressive sound that’ll stand out in a crowd.
Engineers at Rockford Fosgate designed the P1S4-15 15″ subwoofer to dish out the kind of powerful low end you crave in your ride. Its responsive paper cone is reinforced with the same Kevlar fibers used in bulletproof vests so you get the best of both worlds warm bass that’s exceptionally hard-hitting. Rockford Fosgate uses a new technique to attach the oversized rubber surround to the cone that increases available cone area up to 25%, so this sub can push more air for even bigger bass.
The P1S2-15 sub features an extended pole piece and bumped backplate that leaves more room for heavy excursion, so it’ll hit deeper lows without “bottoming out.” This sub works equally well in a sealed or ported enclosure, so you can choose the kind of bass you want for your system.?The sub’s 2-ohm impedance will draw maximum wattage from your mono sub amp.
To drive this single subwoofer, we recommend a mono amplifier rated between 200 and 375 watts RMS at 2 ohms
Product Highlights:
- 15″ 4-ohm subwoofer
- Kevlar? reinforced paper cone
- nitrile butadiene rubber (NBR) surround
- hybrid StampCast basket provides strength while minimizing weight and resonance
- Vertical Attach Surround Technique (VAST?) increases cone area
- power range: 50-250 watts RMS (500 watts peak power)
- frequency response: 18-250 Hz
- sensitivity: 87 dB
- top-mount depth: 6-5/16″
- sealed box volume: 1.3-3.5 cubic feet
- ported box volume: 2.66 cubic feet
SKU: n/a -
12", Pioneer
Pioneer TS-W311D4 12″ Dual Voice Coil Subwoofer (1400W)
More bass. More power. Greater flexibility.
Get powerful, punchy bass in your car ? from the pedigree of world record-breaking subs.
The TS-W310D4 features a combined IMPP cone, which makes the body ultra-rigid yet lightweight, giving you low distortion and powerful bass at high sound press levels.
MPP Composite Seamless Cone
An extremely durable, yet lightweight cone is vital to prevent cone failure at high sound pressure levels. Pioneer?s New IMPP Composite Seamless Cones meet this need perfectly while delivering accurate yet powerful bass.
Dual-Layer Elastic Polymer Surround
Another world?s first from Pioneer. Dramatically improves durability and lightness for superior response, especially for louder volume.Large Surface Area
A speaker cone is essential for air to vibrate and carry sound to listeners? ears. Our Champion Series subwoofer cones have 14% more surface area than conventional subwoofer cones, for louder, better bass reproduction.Single/Dual Voice Coil Design
Pioneer offers single voice coil and dual voice coil designs. The Dual 4 ? subwoofer has the flexibility to be wired at 2 or 8 ?, to get the most from the amplifier. To simplify installation even further, all speaker terminals have been placed on one side of the subwoofer rather than on opposite sides.Air Vent
The movement of air within the subwoofer is smoothly channeled for optimal ventilation to ensure a quick response and clear reproduction of bass.Other Features
? Extra-tough suspension for high durability to withstand high input power.
? 4-Layer Copper voice coil with aluminium former for improved heat dissipation.
? Subwoofer design allows for flexible in-car installation in a box or in a free-air type application.Features
-
Maximum input power1.400?W
-
Nominal input power400?W
-
Impedance2? / 8?
-
Frequency response20 ? 250?Hz
-
Sensitivity (1W/1m)95?dB
-
Woofer size30,0?cm
-
Woofer materialIMPP Composite Seamless Cone
-
Voice Coil typeDual
-
Dual 4? voice coils: 2 or 8?
-
Pole Yoke TypeExtended and Vented pole yoke
-
TerminalsPush-type
-
Weight6.2 kg
-
SurroundDual Layer, Fiber Reinforced Elastic Polymer Surround
Thiele/Small Parameters
-
Qts0,77
-
Fs [Hz]37
-
Vas [ft3]1,21
-
Xmax [mm]10,8
-
Xmax [in]0,42
SKU: n/a -
-
Monoblock, Rockford Fosgate
Rockford Fosgate R1200-1D 1,200 Watt Class-D Mono Amplifier
The PRIME R1200-1D is an ultra-efficient mono amplifier that can produce 1,200 Watts into a 1-Ohm load without taxing the electrical system. The frequency response of the R1200-1D is optimized exclusively for use with subwoofers.
- 12dB/octave Butterworth crossover
- Infrasonic filter
- Remote PLC (Punch Level Control)
- RCA pass-thru outputs
- Real time output and power supply thermal sensing
- Cast aluminum heatsink
- Top mounted controls
- 4 Gauge power/ground connectors
- MOSFET power supply
- Short circuit protection
Number of Channels: 4 Rated Power
(RMS Continuous Power):400 Watts x 1 @ 4-Ohm
800 Watts x 1 @ 2-Ohm
1200 Watts x 1 @ 1-OhmTotal Power
(Sum of Rated Power):1200 Watts RMS Dynamic Power
(PVC/PowerCube?):499 Watts x 1 @ 4-Ohms 0? Res
898 Watts x 1 @ 2-Ohms 0? Res
1,400 Watts x 1 @ 1-Ohm 0? ResBridgeable: No Frequency Response: 20Hz to 250Hz /-1dB Efficiency (average): 85% @ 4-Ohm
85% @ 2-Ohm
80% @ 1-OhmTotal Harmonic Distortion(THD Noise): 4-Ohm: <1.0%
2-Ohm: <1.0%
1-Ohm: <1.0%Crossover Controls: Low-Pass: Variable 50Hz – 500Hz @ 12dB/Octave
Infrasonic:Tone Controls: 0dB to 18dB @ 45Hz Input Sensitivity: 150 mV to 4 V Signal Input: Low Level: 1 RCA Pair Signal Output: Low Level: 1 RCA Pair Power Input Connector: Block Power Wire Gauge: 4 AWG Speaker Output Connector: Block Speaker Wire Gauge: 12 AWG Heat Sink Type: Cast aluminum Cooling: Convection Remote Controls: Variable 0dB to 12dB @ 45Hz Visual Indicators: Power
ProtectCircuit Topology Class: Class-D Operating Voltage: 9 – 16 VDC Recommended Fuse
(not included):150 A Max. Current Draw (13.8V Sinewave): 110 A Average Current Draw (13.8V Music): 55 A Suggested Alternator: 100 A Shipping Weight: 7.825 Lbs. (7.82 Kg.) Dimensions (H x W x D): 1.97″ x 6.77″ x 11.06″
(5cm x 17.20cm x 28.10cm)SKU: n/a -
6" x 9", Rockford Fosgate
Rockford Fosgate R169X3 6 x 9″ 3-Way Full-Range Speaker.
The R169X3 is a 6?x9? 3-way full-range speaker rated at 65 watts RMS for a new generation of factory replacement speakers. Kit includes integrated high-pass crossovers and mounting hardware.
- Vacuum Polypropylene cone
- Rubber surround
- Stamped steel basket
- Silk dome pole mounted Piezo tweeter and midrange
- Integrated tweeter crossover
- Grilles and mounting hardware included
SKU: n/a
