DB Drive K1-12S4 12″ Subwoofer 600W
Out of stock
Specifications:
Max Power 600 watts @4ohm
RMS Power 250 watts
2″4 layer voice coil
Aluminum Former
Vac PP Cone with Polyether foam surround
Poly-Cotton Spider
Vac PP Dome
PVC Trim Ring/Gasket
Spring Terminals
47.5 oz Ferrite magnet
Stamped Steel Frame
Black Electro-plated Top and Bottom Plates
$109 $129
Out of stock
Related products
-
12", DD Audio
DD Audio DD612-D2 12″ Subwoofer
0 out of 5(0)The 600 Series is a great entry point for a higher performance system design that keeps the vehicle as close to stock as possible. The 600 Series will perform like a boss on as little as 300-600 Watts rms, meaning even multiple woofer systems can be driven with one moderate powered amplifier. This keeps electrical upgrades minimal with less added strain on the vehicle. It has a high energy, double stack motor paired with a laminated triple layer poly cotton spider suspension. The 600 Series works best with vented and multi-order?enclosures.
600 Series Features:
-
The 600 series woofers features:
- Double Stitched EROM Surrounds
- High-temp 2.5?, aluminum former voice coil
- 300W-600W RMS
- 1800W Peak
- Triple Layer Laminated Spiders
- Non-pressed paper cones
- Stamped steel basket with cooling vents (note : the 8″ has a cast aluminum basket)
- 10-AWG Push Terminals
- Back plate coil gap venting
- 3-Way cooling
- Extended pole piece
- 110oz double stack magnet
SPECS
MODEL 612 Driver Size – in 12 Power Band – Watts 300 – 600 Burst Power – Watts 1800 VCD – in 2.5 Impedance D2 / D4 Sd – in 10 Fs – Hz 37.68 Qms 6.305 Qes 0.692 Qts 0.624 Vas – cu ft 0.914 Xmech – mm 64 Xmax – mm 13 Cutout Diameter – in 11.125 Mounting Depth – in 5.938 Motor Diameter – in 6.375 Driver Displacement – cu ft 0.09 Shipping Weight – lbs 18 Sealed Enclosure – cu ft N/A Ported Enclosure – cu ft 1.75 – 2.75 SKU: n/a$289$330 -
-
12", JBL
JBL S2-1024 10″ 1000W Switchable Impedance Component Car SubwooferSeries 2, 10″, 250 Watts RMS, Selectable 2 or 4 ohms
-3%12", JBLJBL S2-1024 10″ 1000W Switchable Impedance Component Car SubwooferSeries 2, 10″, 250 Watts RMS, Selectable 2 or 4 ohms
0 out of 5(0)Series 2, 10″, 250 Watts RMS, Selectable 2 or 4 ohms
SKU: JC-S2-1024$145$149 -
12", Fusion
Fusion Performance PF-SW120D2 12″ Subwoofer
0 out of 5(0)Specifications
Mounting Dimensions
Mounting Depth 158mm (6-1/4″) Mounting Diameter 279mm (11″) Product Specifications
Basket Pressed Steel Cone Material Pressed Paper Frequency Response 30Hz – 1.2kHz Peak Power (Watts) 1600 Rated Power (Watts) 400 Sensitivity (dB) 89 Surround Material Butyl Rubber Thiele Small Parameters
Compliance (Cms) (?M/N) 112.00u M/N Cone Area (Sd) (cm?) 530.93 Cone Area (Sd) (In?) 82.29 D.C. Coil Resistance (Re) (?) 4.47 Ohm Electrical Q (Qes) 0.84 Force Factor (Bl) (TM) 14.04 Free Air Resonance (Fs) 38.30 Linear Excurson (Xmax) (In) 0.24 Linear Excurson (Xmax) (mm) 6.00 Mechanical Excursion (In) 0.35 Mechanical Excursion (mm) 9.00 Mechanical Q (Qms) 2.93 Total Loudspeaker Q (Qts) 0.65 VAS (CuFt) 1.58 VAS (L) 44.69 Voice Coil Impedance 2 x 2 Ohm SKU: n/a$90 -
6" x 9", DB Drive
DB Drive S7-90 6″x9″ Coaxial Speakers 250 Watts
0 out of 5(0)Specifications:
Max Power 250 watts
Nominal Power 75 watts
Paper composite cone with TSD coating
Steel embossed woofer basket
EISV Kapton former voice coil for higher power handling
FEA designed Ferrite oxide magnet structure on low frequency drivers
On Axis mount .75″ Silk dome tweeter for superb sound quality on 2-waysSKU: n/a$149 -
5" x 7", DB Drive
DB Drive S7-70 5″x7″ Coaxial Speakers 225 Watts
0 out of 5(0)Specifications:
Max Power 225 watts
Nominal Power 65 watts
Paper composite cone with TSD coating
Steel embossed woofer basket
EISV Kapton former voice coil for higher power handling
FEA designed Ferrite oxide magnet structure on low frequency drivers
On Axis mount .75″ Silk dome tweeter for superb sound quality on 2-waysSKU: n/a$129