DD Audio 712-D2 12″ Subwoofer
Out of stock
Budget-minded car audio lovers can now get affordable quality subs from a global leader. Our new DD AUDIO REDLINE is an import subwoofer line built with the same quality standards as our American-made lines, a favorite of audio enthusiasts. We’re hand-building these subs using the same DD Audio innovations, plus, parts tooled to our exact specifications to provide the performance we demand. The DD AUDIO REDLINE is only available from select dealers.
Technical Specs:
700 Series – 225 oz triple magnet,
3.0″ voice coil,
3 layer spider,
cast frame,
600-1200 RMS/3600 peak,
D2 – D4
$499 $540
Out of stock
Related products
-
12", DD Audio
DD Audio DD612-D2 12″ Subwoofer
0 out of 5(0)The 600 Series is a great entry point for a higher performance system design that keeps the vehicle as close to stock as possible. The 600 Series will perform like a boss on as little as 300-600 Watts rms, meaning even multiple woofer systems can be driven with one moderate powered amplifier. This keeps electrical upgrades minimal with less added strain on the vehicle. It has a high energy, double stack motor paired with a laminated triple layer poly cotton spider suspension. The 600 Series works best with vented and multi-order?enclosures.
600 Series Features:
-
The 600 series woofers features:
- Double Stitched EROM Surrounds
- High-temp 2.5?, aluminum former voice coil
- 300W-600W RMS
- 1800W Peak
- Triple Layer Laminated Spiders
- Non-pressed paper cones
- Stamped steel basket with cooling vents (note : the 8″ has a cast aluminum basket)
- 10-AWG Push Terminals
- Back plate coil gap venting
- 3-Way cooling
- Extended pole piece
- 110oz double stack magnet
SPECS
MODEL 612 Driver Size – in 12 Power Band – Watts 300 – 600 Burst Power – Watts 1800 VCD – in 2.5 Impedance D2 / D4 Sd – in 10 Fs – Hz 37.68 Qms 6.305 Qes 0.692 Qts 0.624 Vas – cu ft 0.914 Xmech – mm 64 Xmax – mm 13 Cutout Diameter – in 11.125 Mounting Depth – in 5.938 Motor Diameter – in 6.375 Driver Displacement – cu ft 0.09 Shipping Weight – lbs 18 Sealed Enclosure – cu ft N/A Ported Enclosure – cu ft 1.75 – 2.75 SKU: n/a$289$330 -
-
Component, DD Audio
DD Audio EC6.5 6.5″ Component Set
0 out of 5(0)The E Class 2-Way Component System is perfect for the listener who wants to instantly take their system from factory to fantabulous. This set offers high-end features and an outstanding sound that rivals much more expensive component sets.
Woofer:
The 6.5-inch Woofer features an injection molded poly cone, rubber surround , and rigid steel frame. For reduced inductance, extended high-frequency roll off , and increased efficiency the voice coils features a double slit former and the motor utilizes a copper pole cap . The soft parts are driven with a high flux 11 Oz ferrite magnet motor.Tweeter:
The 20-mm silk dome tweeter comes with flush-mount and surface-mount solutions.Crossover:
The crossover networks are built with premium components including Mylar capacitors, segmented air-core inductors and poly fuses for tweeter protection. Two selectable tweeter levels are provided for fine high-frequency tuning.Driver Size – in
Woofer 6.5 / Tweeter 20mm
Power Band – Watts
25-100
Coil Configuration
S4
Frequency Response – Hz
50-20k
Cutout Diameter – in
Woofer 5.60 / Tweeter 1.59
Mounting Depth – in
Woofer 2.45 / Tweeter 0.53
Shipping Weight – lbs
10LbsAny DD Audio Product bearing the Marine Grade logo incorporates water resistant features enabling it to be used in applications where moderate exposure to moisture will not result in damage to the product.
Marine Grade products are not waterproof, and submersion or excessive moisture exposure may result in product failure. DD Audio Marine Grade products are not certified for saltwater environments.
Copper Capped Pole Piece
As current flows through the voice coil, it generates its own magnetic field which interacts, or modulates the motors permanent magnet field. A shorting ring cancels these magnetic field changes and lowers inductance, extending the frequency range and reducing harmonic distortion.Aluminum – Double Slit Voice Coil Former
The aluminum former material acts as a heat sink, lowering the voice coil temperature. The double slits in the former break up and reduce magnetic eddy currents generated by the moving coil. The coil design works in conjunction with the copper capped pole piece to further reduce heat, inductance, and harmonic distortions.SKU: n/a$289$330 -
12", Rockford Fosgate
Rockford Fosgate P1S2-12 12? Punch P1 2-Ohm SVC Subwoofer
0 out of 5(0)Rockford Fosgate P1 12? is the first in a family of famous ?Punch? subwoofers. The P1S2-12 features a 2-Ohm voice coil, 250 Watts RMS power handling, and can accommodate a grille insert using the included soft touch ABS trim ring.
- Linear spider with embedded 16 AWG tinsel leads
- High-temp voice coil with spun-laced Nomex? re-inforcement collar
- Kevlar fiber reinforced paper cone
- StampCast basket with integrated spider venting
- Soft touch ABS trim ring with optional grille
- Custom 10-AWG nickel plated push terminals
- Extended pole piece and bumped vented backplate
- Protective PVC textured magnet cover
SKU: n/a$199